View Single Post
  #13  
Old 28th December 2016
Train_Horny_UK's Avatar
Train_Horny_UK Train_Horny_UK is offline
Senior Member
 
Join Date: January 2015
Location: Essex, UK
Posts: 152
Train_Horny_UK is on a distinguished road
Default Re: Difference between HB and GW manual valves

Quote:
Originally Posted by DBO View Post
The pics are not what I'd consider a good guide if wanting to make minute comparisons on flow rate. Valve stem has nothing to do with the flow. Both valves have 1/2" NPT fittings and the inside architecture of the valve was undoubtedly copied from the Graham White.

Would you have a quality difference? Yes, absolutely
Would there be any difference in flow rate that you could pick up with your ears by listening to a bellowing train horn? Absolutely not!

If quality and reliability is your main concern, then spend the extra coin on a genuine GW, but if all you're worried about is the possibility of losing out on volume due to flow rate, you're barking up the wrong tree.
Do you still stand by this?????
__________________
"Lets Get Train Horn-y"
>>>
World Record Train Horn Setup

MY SETUP:>
http://bit.ly/1TwihDu
Reply With Quote