Go Back   Train Horn Forums > Regional > Europe
 Register

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 1st June 2013
Stinkypete's Avatar
Stinkypete Stinkypete is offline
Super Stinky!
 
Join Date: February 2009
Location: ROYSTON, Hertfordshire.
Posts: 2,796
Stinkypete is on a distinguished road
Default Re: How to install??

I had that kit when I first started HornBlasting & the compressor went wrong on several occasions untill it finally died.

Okay, first and most obvious thing to check is the pressure switch. On the top of the Tank is the pressure switch, near the pressure gauge, Pull off the two spade end connectors and get a small paper clip or a piece of wire & use this to bridge between the two spade end connectors, thus bypassing the pressure switch.
Now connect the compressor to the battery, in theory it should start running & proves the compressor is ok and the pressure switch is faulty!
If that don't work, throw it in the bin & buy a decent HornBlasters 228vx Shocker kit, more air, more noise, more fun & certainly less hassle.
!
__________________
https://www.trainhornforums.com/showthread.php?t=6818

K5 AIRCHIMES ON A LITTLE NEMO VAN
8.5 GALLON AIR TANK
3 x VIAIR 400c COMPRESSORs
HORNBLASTERS MANUAL VALVE
2 x 1/2" SOLENOIDS
HORNBLASTERS 100w PA SYSTEM
100ft 2 CHANNEL REMOTE CONTROL UNIT

check out www.hornstaruk.co.uk TWO IN THE PINKY, ONE IN THE STINKY!!
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:48 AM.