If curious, my coalescing filter was made by Coilhose Pneumatics. It’s part number 8924M. KBC Tools had the cheapest price by far on it. If you Google ‘1-816-8924M’ (without the quotes), the first result should be the relevant KBC Tools catalog page.
Coilhose makes smaller ones and it would have been cheaper to get one. I wrestled with getting a smaller one, but the next size down is barely adequate for the max CFM of the York 210L, and I didn’t want the coalescing filter to hamper CFM in my application. I’m also using 1/2" NPT throughout as much of the system as possible, so that was another reason for the model I got.
A metal bowl is a must for my application since it’s mount location is in the engine compartment. It’s also the very first stop from the compressor (with a load genie check valve/unloader combo right after the coalescing filter), so it’s taking the compressed air at its hottest … in an already-hot environment.